The Fire Beam BLUE App Controlled Auto-Aligning Beam Detector (7-70m) FB-BLUE The Fire Beam Company

Description

The Fire Beam BLUE App Controlled Auto-Aligning Beam Detector Fire Beam BLUE Beam Detectors provide all the features of the Fire Beam Xtra but are commissioned and controlled using the Fire Beam BLUE app. There are two key components to the Fire Beam system: the Fire Beam Head and the Fire Beam Reflector. It works by sending a signal from the head to the reflector. The reflector bounces the signal back to the head and, if the returning signal is obscured, a fire event is registered. The Fire Beam BLUE uses auto alignment to align itself to the centre of the reflector when commissioning and will automatically keep alignment if there is any building movement. The Fire Beam BLUE is reliable, easy-to-install and can be commissioned very quickly with automatic alignment taking just over three minutes to complete. The Fire Beam BLUE supports seven different languages: English, German, Spanish, French, Italian, Dutch and Czech. Electrical Specifications: Supply Voltage 12 to 30 Vdc normal Supply Current 5.5mA in all operational states Supply Current 13.5mA in fast commissioning Environmental Specifications: Temperature -10°C to +55°C Humidity 10 to 95% RH Non-condensing Protection Index IP65 when suitably mounted and terminated Mechanical Specifications: Beam Head H:180mm x W:155mm x D:137mm – Weight 1.1kg 70KIT140 Mid-Range Reflector H:293mm x W:293mm x D:5mm – Weight 0.8kg 140KIT160 Long-Range Reflector H:394mm x W:394mm x D:5mm – Weight 1.8kg Adapter H:270mm x W:250mm x D:5mm – Weight 0.6Kg(mounts the Beam Head onto Unistrut) Optical Specifications: Optical Wavelength 870nm Maximum Angular Alignment ±5° Maximum Angular Misalignment (static not auto-aligning)Beam Head ±0.4°  /  Reflector ±2° Operational Specifications: Protection Range Fire Beam BLUE Standard Product 7 to 70 metres. Use short range mask for distances between 7 & 20 metres 70KIT140 Mid-Range Reflector Kit 70 to 140 metres 140KIT160 Long Range Reflector Kit 140 to 160 metres Alarm Sensitivity Levels 25% (1.25dB) to 50% (3dB) in 1% (0.05dB) increments (default 35% (1.87dB)) Alarm Condition: Obscuration drops to below pre-defined sensitivity level. Time to Alarm Condition adjustable between 2 to 30 seconds in 1 second increments (default 10 seconds) Alarm Indication: App Status – FIRE Head Red Flashing LED Alarm Relay Change Over (CO) Contact Rating 2A @ 30 VDC Test / Reset Features: Beam test function with App Alarm latching / auto-reset selectable (default auto-reset) Alarm reset in latching mode with App reset function, removing power for >5 seconds or momentarily apply >5 VDC to reset connections in Beam Head Fault Sensitivity Level: <4% Fault Condition: Obscuration drops to below the fault sensitivity level within 1 second Power Down or Supply Voltage < 9 VDC Commissioning modes, Pre-Alignment and Auto-Alignment Beam turned off during Beam Maintenance Time to Fault Condition adjustable, 2 to 60 seconds in 1 second increments (default 10 seconds) Fault Indication: App Status – FAULT Head Yellow Flashing LED 1 Second Fault Relay Change Over (CO) Contact Rating 2A @ 30 VDC Normal Condition: Obscuration level is above the Alarm sensitivity level App Status – NORMAL Programmable on/off Head Green Flashing LED Programmable on/off Auto-Align / Beam Contamination Compensation: Auto-align during normal operation if obscuration drops below 90% for the duration of the align time set (doesn’t affect normal operating mode) Beam Contamination Compensation 4 hour monitoring. Compensation data available in the App